HYBRID PAINT COATING | TOP COAT SERIES | GLOSS AND HYDROPHOBICITY | SERVICE LIFE 9 MO.
9 mo
Service life
18–20 ml
Per vehicle
5–10 min
Before polishing
6–8 h
Final curing
Surface
Clean, polished, dry
Temperature
+18 to +25 °C
Humidity
max 60%
Before polishing
5–10 minutes
Final curing
6–8 hours
Shelf life
3 years
01
OVERVIEW
DIAMOND CarLifeCare is a hybrid protective paint coating from the Top Coat series. Apply to a clean, polished, dry and degreased surface at +18…+25 °C and humidity no higher than 60%. Failing to follow application conditions will result in more difficult polishing.
02
PROPERTIES
◈
Hybrid formula
Combines the properties of ceramic and polymer — hardness and elasticity in a single product.
⬡
Gloss finish
Delivers a deep mirror-like shine and enhances colour richness.
∿
Hydrophobicity
Water-repellent effect — droplets bead off the surface, carrying dirt with them.
▣
Sealing top coat
Acts as a finishing Top Coat over RS9, or as a standalone product — no layering required.
03
USAGE MODES
💎
OVER RS9
Finishing sealing layer used together with RS9. Seals and enhances the entire protection system.
✨
STANDALONE
Independent coating for gloss and hydrophobicity without base layers. No layering required.
04
KEY ADVANTAGES
✦
HYBRID FORMULA
Ceramic hardness + polymer elasticity
✦
MIRROR GLOSS
Deep shine and colour richness
✦
HYDROPHOBICITY
Droplets bead off, carrying dirt away
✦
NO LAYERING
Top Coat — one coat, no reapplication needed
✦
18–20 ML CONSUMPTION
Economical — covers the whole vehicle
✦
9-MONTH SERVICE LIFE
Durable protection for up to 9 months
"Diamond gloss and protection — in a single finishing coat"
05
APPLICATION PROCESS
1
Perform professional preparation of the paint surface using a professional degreaser (CarLifeCare ACTIVATOR or equivalent). Adhesion and subsequent polishing depend directly on the use of the activating component.
2
Before application, shake the bottle for 3–5 minutes. Do not leave the bottle open during work.
3
Apply using the special applicator in small sections in a cross-hatch pattern (top-to-bottom, left-to-right, no gaps). Work panel by panel, without pressure, in sections up to 60×60 cm.
4
5–10 minutes after application, buff the surface with a microfibre cloth using light, straight and quick movements without pressure, removing all excess. Circular movements are prohibited. Start with short intensive movements and finish with long strokes across the full panel length. Check quality with an inspection light.
5
DIAMOND is a Top Coat product — no layering is required. It acts as a sealing coat over RS9 or as a standalone product for gloss and hydrophobicity.
6
Final curing in a warm, dry environment after application — 6–8 hours.
06
PRECAUTIONS
▲
Store in a dry, cool place out of reach of children.
▲
Avoid contact with water during application.
▲
Wear nitrile gloves and a protective mask during application.
▲
Do not wash the car with chemicals for 5–7 days after application.
▲
Store bottle tightly closed, in a dark place away from direct sunlight.
