FINISHING PROTECTIVE LAYER | STANDALONE OR WITH BASE | SERVICE LIFE 12 MO+
12 mo+
Service life
18–20 ml
Per vehicle
30–60 s
Before polishing
60×60 cm
Starting area
Temperature
+18 to +25 °C
Humidity
max 60%
Before polishing
30–60 seconds
Curing summer
2–4 hours
Curing winter
6–8 hours
Shelf life
3 years
01
OVERVIEW
The finishing protective layer of the CarLifeCare system. Has strong standalone durability — can be used as an independent coating or together with Base CarLifeCare for maximum protection. Apply to a clean, polished, dry and degreased surface at +18…+25 °C and humidity no higher than 60%. Failing to follow application conditions will result in more difficult polishing.
02
USAGE MODES
🛡
STANDALONE USE
Excellent durability and protection without additional layers. Ideal for quick coating refresh or treatment of vehicles in good condition.
⚡
WITH BASE SYSTEM
Maximum protection as part of the three-layer system Base Polymer → Base → Top. The finishing layer strengthens and seals the entire system.
03
KEY ADVANTAGES
✦
FINISHING DURABILITY
Strong standalone hardness without base layers
✦
FAST POLISHING
Coating ready to buff within 30–60 seconds
✦
DROPLET EFFECT
Forms droplets on surface — signal to start polishing
✦
GLOSS SURFACE
Perfectly smooth glossy surface after polishing
✦
COMPATIBILITY
Works standalone or in system with Base CarLifeCare
✦
12 MO+ SERVICE LIFE
Long-term protection when application conditions are met
04
CONTRIBUTION TO THE SYSTEM
Property
Contribution
Description
Hydrophobicity
80%
Final water-repellent barrier
Chemical resistance
50%
Protection from reagents and contaminants
Gloss
90%
Enhances shine and colour depth
Hardness
60%
Standalone coating hardness
Adhesion
40%
Bond to Base layer or paint
"The final chord of protection — perfect gloss, maximum durability"
05
APPLICATION PROCESS
1
Perform professional preparation of the paint surface with final degreasing using CarLifeCare ACTIVATOR or equivalent. Adhesion and subsequent polishing depend directly on the use of the activating component.
2
Before application, shake the bottle for 3–5 minutes. Do not leave the bottle open during work.
3
Apply using the special applicator in small sections in a cross-hatch pattern (top-to-bottom, left-to-right, no gaps). Start with an area of 60×60 cm — the area can be increased as you go. Spread the coating evenly with no missed spots.
4
After 30–60 seconds the coating will begin forming small droplets on the surface (repelling excess). Buff with microfibre using straight, firm movements without pressure. Circular movements may leave hologram marks. Start with short intense movements and finish with long strokes across the full panel length. Check quality with an inspection light.
5
TOP CarLifeCare has strong standalone durability. Can be used independently or together with Base CarLifeCare.
6
Final curing in a warm, dry environment: summer — 2–4 hours at +20°C; winter — 6–8 hours.
06
PRECAUTIONS
▲
Store in a dry, cool place out of reach of children.
▲
Avoid contact with water during application.
▲
Wear nitrile gloves and a protective mask during application.
▲
Do not wash the car with chemicals for 5–7 days after application.
▲
Store bottle tightly closed, in a dark place away from direct sunlight.
