CarLifeCare · Wheel Protection · Professional Series
WHEELCarLifeCare
CERAMIC COATING FOR WHEELS | TEMPERATURE +18…+25 °C | SERVICE LIFE UP TO 3 MO.
3 mo
Service life
25 ml
Per vehicle
20–40 s
Before polishing
<60%
Max humidity
Surface
Clean, polished, dry
Temperature
+18 to +25 °C
Humidity
max 60%
Before polishing
20–40 seconds
Curing summer
2–4 hours
Curing winter
6–8 hours
01
OVERVIEW
WHEEL CarLifeCare is a ceramic protective coating for alloy wheels. Apply to a clean, polished, dry and degreased surface at +18…+25 °C and humidity no higher than 60%. Failing to follow application conditions will result in more difficult polishing. Compatible with wheels of any shape — including complex multi-spoke designs.
02
PROPERTIES
◈
Ceramic protection
Creates a hard ceramic film on the wheel surface, protecting against brake dust, road chemicals and scratches.
⬡
Anti-adhesion
Dirt, brake dust and bitumen do not stick — wheels are much easier to clean after every drive.
∿
Gloss effect
Perfectly smooth glossy surface after polishing enhances the appearance of any wheel.
▣
Universal application
By applicator or air spray (trigger/mini-jet) — for wheels of any complexity.
03
KEY ADVANTAGES
✦
CERAMIC FILM
Hard protection from brake dust and road chemicals
✦
ANTI-ADHESION
Dirt does not stick — wheels wash far more easily
✦
GLOSS SURFACE
Professional appearance after treatment
✦
COMPLEX SHAPES
Trigger or mini-jet application for any wheel design
✦
25 ML CONSUMPTION
Economical — covers all 4 wheels per vehicle
✦
3-MONTH SERVICE LIFE
Durable protection for up to 3 months
"Factory-fresh wheels — ceramic protection on every drive"
04
APPLICATION PROCESS
1
Perform professional surface preparation with final degreasing using CarLifeCare ACTIVATOR. Adhesion and subsequent polishing depend directly on the use of the activating component.
2
Before application, shake the bottle for 3–5 minutes. Do not leave the bottle open during work.
3
Apply using the special applicator in small sections. Spread the coating evenly over the surface. For complex wheel designs, air application using a fine-mist trigger or mini-jet is permitted.
4
Average curing time before polishing — 20–40 seconds (depending on temperature and humidity).
5
When polishing, start with short intensive movements and finish with long strokes across the full length of the panel. Achieve a perfectly smooth glossy surface.
6
Final curing in a warm, dry environment: summer — 2–4 hours at +20°C; winter — 6–8 hours.
05
PRECAUTIONS
▲
Store in a dry, cool place out of reach of children.
▲
Avoid contact with water during application.
▲
Wear nitrile gloves and a protective mask during application.
▲
Do not wash the car with chemicals for 5–7 days after application.
▲
Store bottle tightly closed, in a dark place away from direct sunlight.
